Tray 2 paper-feed module disassembly
Remove the paper-feeder plate to gain access to the paper pickup drive assembly. It is not necessary to separate the engine module from the paper-feed module to gain access to the paper-size detection PCB, although it will provide easier access.
Figure 86.
Removing the tray 2 paper-feeder plate 1 2 3 4 5 6 7 8 9 Separate the engine module from the paper-feed module (page 171). Remove the tray from the paper-feed module. Remove the four self-tapping screws (one screw is recessed in front). Lift the paper-feeder plate to remove it. Release the two tabs on the paper-size detection PCB cover. Disconnect the three cables on the paper-size detection PCB. Press the two tabs to release the paper-size detection PCB. Note the cable routing. Slide the PCB from the paper-feeder frame. Remove the two machine screws from the paper pickup drive assembly.
